Place of Origin:
Throughing idlers. generally used for conveying bulk materials. are available with side rollers inclined at 20° and 30°. Idlers with 45° or other troughing angles can also be supplied in special cases.
Flat belt impact idlers protect the belt by absorbing impacts at transfer points.
Flat belt training idlers automatically train the belt and protect the belt edges from damage caused by misalignment. Available in the positive action type for belt operating in one direction.
|Two Roll tykpe Troughing Idlers & brackets are used to carry bulk material & the same are available with 20° and 30° Inclined Idlers
||For Conveying large quantity of bulk material Three roll type braket with 20° ,30° and 45° Inclined Idlers are available.
|Troughing angle impect Idlers generally used for absorbing impect at loading point & protect belt, Idlers are available in two roll type & Three roll type bracket & having troughing angle 20° ,30° & 45° .
||Due to eccentric loading, soiling slipage of the material to the drum pulleys and idlers roller may cause the belt to run crooked to prevent the belt from running to the rollers self aliging Idler of various angles & design are available.
|For horizontal flat belt conveyor pogitive action type belt training Idlers are available in any size.
||Conveyor Pulley customised with Lagging.
Trough belt training idlers, also popularly known as self-aligning troughing idlers, automatically train the belt and protect belt edges from damage caused by misalignment. The standard types are available with 20° and 30' troughing
Troughed belt rubber cushion idlers which are also known as impact at loading point. They include 200 and 300 trough. However, idlers wiht 450 or other troughing angles can also be supplied.
Return belt idlers are used for supporting the return run of the belt. The standard type includes single roller with end brackets. However, inclined two·rol1er type is also available for specific application.
Return belt rubber tread idlers are used when wet or sticky materials tend to cling to the belt where corrosion resistance is required or where chemical action to iron or steel is involved.
The shell is made of precision smooth surface "ERW" steel tube as per IS: 9295.
Bearing Housing made of pressed steel sheet with calibrated bearing seat, are welded with te periphery of the steel tube. for maximum strengths.
Spindless are made from M.S. bright bars and are precision ground at bearing and seal seating areas.
Precision single-raw deep grove ball bearings with C3 clearance are provided. Distance between bearing and point of support at the shaft is very short and thus ensure higher load carrying capacity and longer service life.
The double multi labyrinth seal ensures optimum protection against the entry of dust and dirt in to the bearing.
Inner Seal ,
Dust Cover ,
Hi-lithium base grease is filled in measured quantities in bearing and seals and rollers are sealed for life.
Idler rollers are manufactured as per IS 8598 for Belt width as per IS 4776 as well as to suit existing conveyor frame by providing adapter.
Extremely light weight construction ensures less torque, imparting longer life to belt, motors, pulleys and driving arrangements. Extremely low friction factor ensures very low.
Mode of Payment:
Within 5-6 Weeks
We appreciate your valued enquiry.